Flat Die Pellet Mill (Small Feed Pellet Machine) 

The ZWSP D-Type series machine is designed to process  corn, soybean, bone meal, soya meal, bran into animal feed which is good to smell and nutritious.

Product Features

1. Simple operation and easy maintenance.

2. Vertical feeding design enables materials to fall directly into the pressing area to prevent bridging of forage. The die plate is reversible for double-sided use, which prolongs service life and reduces operating costs.

3. Wide adaptability. It is compatible with concentrated feeds including corn and soybeans, as well as rough forage materials like straw and alfalfa.

Technical Parameters

Main constructions:  Diesel engine, Gear Box, Axis, Flat Die, Roller, Feeding room, Cutting blade, Outlet.

Working principle 

The ZWSP D-Type series pellet press machine uses the diesel engine，electric motor，gas engine and PTO as power. The gears derive the spindle and die. The raw materials are forced out of the die holes by the squeezing action of the die and roller. Then the high quality pellets are produced. The length of the pellets can be controlled by adjusting the position of the tool bit.

Raw materials moisture content:

Due to different kinds of raw materials, the requirements to the moisture are different. Usually we require sawdust moisture content 10%-18% while mix the materials evenly.

Particle size :

The length of the material cannot exceed the diameter of the die hole.For example, if the diameter of the die hole was 6mm, the length of the

Material could not be longer than 6mm. Please ensure the right size of Raw material, or else, they will easily damage the machine.